SLK-R660 full Netcom 5G router
- Product description
- Parameters
- Order information
- Application
- Size
- Related download
- OEM
Introduction:
SLK-R660 is a high-speed 5G router basing on technology of 5G NR/LTE-FDD/LTE-TDD/HSPA+ cellular modem with high-speed dual-core CPU, It supports NA/SA networking and provides high speed 5G internet connection for various terminals.
Equipped with physical interfaces: 2 10/100/1000M Ethernet ports, 2 RS232/485 serial ports, 4 digital input DI ports, 2 digital output DO ports, 1 self-elastic NANO SIM card slot and 1 TF card slot, supports wide voltage input 9-28V.. It is slim design with high-quality aluminum cover, Which makes sure fast heat dissipation.
This router is widely used in the Internet of things industry chain of M2M industry, such as self-service terminals, smart power grid, smart transportation, smart home supplies, financial device, mobile POS terminals, automatic supply chain, industrial automation, intelligent buildings, fire control,environmental protection, meteorology, digital medical treatment, agriculture, forestry, water, coal, petrochemical and other fields.
Features:
●Professional High-speed dual-core communication processor
●2 x 10/100/1000M Ethernet LAN/WAN Ports
●5G NR/LTE-FDD/LTE-TDD/HSPA+ Network
●NA/NSA networking mode, China Mobile Unicom Telecom and other 5G networks
●1 x NANO SIM card slot
●1 x TF card slot, which can support up to 128GB capacity expansion
●2 x RS232/485 serial port
●4 x Digital input DI port, 2 x digital output DO ports
●Support DC9-28V input voltage
●Support 35MM standard DIN rail installation
Parameters
|
Hardware |
|
|
CPU |
MTK dual-core 880MHZ CPU |
|
RAM |
2G bit RAM |
|
SPI FLASH |
16M(bytes)default |
|
Nand Flash |
128MB(Bytes)Optional |
|
TF card expansion |
Maximum support 128GB (Bytes) capacity expansion (optional) |
|
OS |
LINUX latest version |
|
Band Supported |
5G/4G/3G Version |
|
|
5G |
Sub-6G |
N1/N2/N3/N5/N7/N8/N12/N20/N25/N28/N40/N41/N66/N71/N77/N78/N79 |
|
4G |
LTE-FDD |
B1/B2/B3/B4/B5/B7/B8/B12/B13/B14/B17/B18/B19/ B20/B25/B26/B28/B29/B30/B32/B66/B71 |
|
4G |
LTE-TDD |
B34/B38/B39/B40/B41/B42/B48 |
|
3G |
WCDMA |
B1/B2/B3/B4/B5/B8 |
|
Theory of Bandwidth |
• Sub‐6G: Uplink up to 300Mbps, Downlink up to 4 Gbps • LTE CAT20: Uplink up to 150Mbps, Downlink up to 2.4Gbps • HSPA+: Uplink up to 5.76Mbps, Downlink up to 42.0Mbps This is the theoretical value, the actual speed is subject to the local operator |
|
|
Carrier support |
Support the three major operators of China Mobile, China Unicom, and China Telecom, as well as operators of corresponding frequencies abroad |
|
|
Router characteristics |
|
|
Firewall |
Network Address Translation(NAT) |
|
State full Packet Inspection(SPI) |
|
|
Media Access Control |
CSMA/CA with ACK |
|
VPN protocol |
PPTP, L2TP , OpenVPN Client |
|
DHCP |
Build-in DHCP (Dynamic Host Configuration Protocol) |
|
Others protocol |
Supported PPP, PPOE, DDNS, ICMP, VRRP etc |
|
Characteristic |
FRP intranet penetration, and Modbus protocol etc. |
|
Serial port |
|
|
Number of serial ports |
2 |
|
Serial port standard |
Each channel supports RS232/485 standard, Connect the corresponding physical interface |
|
Serial port rate |
Baud rate supports up to 115200bps |
|
RS232 pin definition |
The first RS232 serial port: TXD1, RXD1, GND three-wire system The first RS485 serial port: A1, B1 two-wire system The second RS232 serial port: TXD2, RXD2, GND three-wire system The second RS485 serial port: A2, B2 two-wire system Note that each serial port can support 232/485, just connect the corresponding pins, not at the same time |
|
Serial working mode |
TCP Server TCP Client UDP Modbus RTU to Modbus TCP Server |
|
IO port |
|
|
Digital quantity input |
4 DI inputs |
|
DIN1, DIN2, DIN3, DIN4, DCOM is public port |
|
|
Work agreement: MODBUS TCP SERVER, Default port 502 The upper computer establishes a connection through MODBUS TCP CLIENT: SLK-R660 default IP+ 502 port |
|
|
Digital quantity out |
2 DO out |
|
DO1, COM1, DO2, COM2, COMis public por |
|
|
Relays out |
|
|
Work agreement: MODBUS TCP SERVER, Default port 502 The upper computer establishes a connection through MODBUS TCP CLIENT: SLK-R660 default IP+ 502 port |
|
|
Other interfaces |
|
|
LAN/WAN interface |
1 x 10/100/1000M Ethernet LAN port |
|
1 x 10/100/1000M Ethernet LAN/WAN port, the default is WAN port, which can be changed to LAN port from the configuration page |
|
|
Reset button |
1 reset button, reset to factory settings |
|
antenna |
4x 5Gantenna(50Ω SMA interface) |
|
LED |
Power: Power indicator, always on when power is on SYS: System indicator, flashing during system startup, always on after startup 5G: After registering to the 5G network, this light is always on RDY: The network registration is normal and the light is always on when the network can be connected 4 LED lights on the right side are signal strength indicators |
|
SIM card slot |
1 x self-elastic NANO SIM card slot, support 1.8/3.3V SIM card |
|
TF card expansion slot |
Support up to 128G (Bytes) TF card |
|
Power interface |
|
|
Default power |
DC 12V/1.5A Power adapter (optional for US, EU and other standards) |
|
Input VDC |
9~28VDC |
|
Power Consumption |
20W (Max) |
|
Physical data |
|
|
Operation temperature |
Storage temperature: (-40°C to 85°C) |
|
Operating temperature: (-40°C to 75°C) |
|
|
Relative humidity |
95% |
|
Size |
L*S*H: 144mm x95mm x 50mm |
|
Install |
Support 35MM DIN rail installation |
|
Weight |
net weight: 505g |
|
Accessories with packaging: 861kg |
|
|
Related certificates |
CCC, CE, FCC, RHOS |
|
Warranties |
2 year |
|
Package Contents |
5G CPE terminal, 1.5m RJ45 network cable, 12V/1 .5A power adapter, 4 glue stick antennas Instruction Manual (PDF version is optional) |
Order information
Application
Size
Related download
